TEL:021-50836933

E-MAIL:Sales@bestry-mate.com

Location:Home > News > Industry News

Back
The special relation between thermal plastic and LED lamps
2017-7-16

      Driven by policy and market dual power, thermal plastic is entering in a strong golden age. With the development of LED industry, security risks once again attach the attention, the relative quality topics are also widely discussed by the national leaders in the two sessions.

The main components of thermoplastic materials include matrix materials and fillers. The matrix materials include PPS, PA6 / PA66, LCP, TPE, PC, PP, PPA, PEEK and so on. While the fillers include AlN, SiC, Al2O3, graphite, fibrous high thermal conductive powder and scaly high thermal conductivity.

With the rapid development of China's LED industry, which greatly stimulates the development of upstream material industry, but also further promote the breakthrough of high-end materials. LED lamps will apply a large number of plastic parts, including LED packaging devices, LED optical lens, light scattering components, efficient cooling components, light reflection and light diffusion board and so on.

From the whole life cycle, organic composite materials thermal plastic is more environmentally friendly than metal materials produced by the consumption of less energy, pollution from the production process is small, in line with national energy conservation, energy conservation needs. With the promotion of LED light efficiency and reduction of the heat generation, so LED cooling requirements will be gradually reduced, thermal plastic radiator will be able to meet most of the cooling requirements of conventional LED lamps.

However, the problems that the general application of low-end products, homogenization, insecurity and other issues are increasingly serious, the products have low-quality and low-cost, and the chaos is difficult to be removed, the industry's first round of "big reshuffle" is coming. 

In 2017, the development of LED lighting industry ushered in the turning point, in the endless tide of rising prices and continual shuffle of this industry, many lighting companies began to think about the road of business transformation, and made a series of business changes. Therein, some enterprises transform the positioning, from the low-end market to the high-end market, access to significant results, at the same time, they also attracted a lot of LED enterprises have to transform positioning high-end market to strengthen research and development, technology, bring out new products, But who will really become a big winner in the high-end market? It must be not an easy task for any one LED lighting business.

Ordinary materials affect product quality and safety, the industry needs to be upgraded, which will promote the development of the next generation of thermal materials, so the industry opportunities and the future meet unexpectedly. LED brand enterprises have been hesitantly put into the chase of the product quality and positioning. There are some solutions available to the problem, encouragement of the national policy even formulated a clear timetable for the industry's new material outbreak. Of course, once the explosive growth appears and the opportunity emerge. LED lighting enterprises in the search for a breakthrough, and thermal plastic is also more and more to replace the ordinary materials used in LED lamps thermal components, which mainly include lampholders, cooling heat cups and shells and so on.

It is understood that the shell cooling materials for current traditional lamp mainly include the following three thpes: metal materials, ceramics and general plastic. Thermal plastic as a new material, mainly three areas of advantages as show below:

Firstly, reduce costs. Thermally conductive plastic can be combined with some cost-effective power program, greatly reducing the cost of the overall lighting.

Secondly, shape the plastic. LED lighting will not only stay in the lighting industry itself in the future development, it will become a port of the Internet, or a component of the room, so it is very particular about plastic, compared with traditional aluminum products, plastics can provide a great help in shaping.

Thirdly, safe and environmentally friendly, able to do recycling, above all, the good insulation also ensure the safety of its application.

The spherical alumina high-end thermal powder filler produced by the independent core equipment from Bestry, not only break the monopoly of foreign enterprises, the market share is more than 60 percent, but also the products are also exported to the United States, South Korea and China Taiwan. Above all, the product quality, stability, the deep re-processing technology, the application of thermal conductivity powder and the development technology have been widely praised by many large-scale companies in the field of thermally conductive materials. We are convinced that with the high thermal conductivity of plastic in the LED lighting industry, we can hold more bright development opportunities.

Shanghai Bestry Performance Materials Co., Ltd.  All Rights Reserved 沪ICP备15015672号 Room 209, Yunchuang Space, 325 Yunqiao Road, Pudong, Shanghai